In this modern era, Netgear is one of the best and leading companies in the internet industry. It manufactures many networking devices and regularly releases new firmware versions for various models of its extenders and other devices to enhance overall productivity and to add new features. Nevertheless, if you don’t update the firmware of your extender after the Nighthawk extender setup, then you are making a big mistake because it can put a terrible impact on the performance of the networking device.
So, if you want to make your Netgear WiFi range extender up and running, you have to update its firmware. Don’t know how to update the Netgear extender’s firmware? You know the procedure but unfortunately failed to update? Don’t worry; we will guide you in this write-up. We advise you to walk through the post without missing any information.
Why Extender Firmware Update Failed?
Well, to your information Netgear extender firmware update failed issue can occur due to many reasons. The major culprit is a defective Ethernet cable that makes connection between the extender and the host router. Below we discuss some more reasons for you so that you can identify them properly to fix the issue.
Either you have a weak internet connection or poor network security. The firmware of the Netgear extender can fail if you don’t have a constant and reliable internet connection.
When the usage of networking devices is exceeded without giving it some rest, then the device can become the victim of technical glitches which leads to network problem.
There is a chance that your device uses corrupted firmware which leads the issues in the device. Because corrupted firmware stops the device functions. Plus weaken the security of the device.
Loose Ethernet Connection
If you make a wired connection between the extender and router, the cable is damaged and broken somewhere which led to the firmware update failure issue.
Now, you are properly familiar with the Netgear extender firmware update failed issue. You can easily fix this on your own by following the quick hacks.
Fix: Extender Firmware Update Failed
Whenever you are going to implement the troubleshooting tips to fix the networking devices issues always try to start with the reboot process. The reason is, many users of Netgear fix the trouble by rebooting their devices.
By restarting you will also remove the technical glitches from the device easily. Below we give instructions to restart the device:
- Firstly, Power off the device and remove the power cable from the socket.
- Give some minutes to recover the device.
- Thereafter, reconnect the extender to the power socket.
- Turn-on the extender.
Now you know the procedure to restart the device. After completing this, you should try to update the firmware to ensure if the issue is fixed or not.
Change the Source of the Connection
Did you use the Ethernet cable to connect the extender to the router? If yes, then you have to change the mode of connection. Maybe the cable you use is damaged or defective from somewhere which leads to the issues.
You can connect the devices wirelessly. In this method, you need to place the extender and router closer to each other.
Remove Wireless Interference
You can also face the firmware update failed issue due to wireless interference because when a device becomes the victim of WiFi interference, it weakens the signal strength. To avoid wireless interference you need to keep the extender on a higher shelf. In short, place the extender above the floor because the networking device spread the network downwards instead of upwards.
You also need to keep the extender away from the home appliances and metal objects.
Keep the Devices Closer
If there is a lot of distance between your router and the extender device, then it will create a communication gap between them. Therefore, you must disconnect your extender from the power source and then connect it to the electrical outlet that is close to your router.
These are the hacks that you have to follow to fix the firmware update failed issue. If you are not able to fix the trouble, then you can take the help of the Nighthawk app to update the firmware.
We hope with the assistance of this write up you will able to update your device firmware in a hassle-free manner. You just need to follow the above-mentioned hacks to fix the trouble.